Enjoy paddy! and snap some in action pics for us eh!
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| tomorrow is the day http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=5313 |
Page 1 of 1 |
| Author: | PaddyD [ Sat Feb 25, 2006 10:43 pm ] |
| Post subject: | |
tomorrow i finally get to fire up my new CNC router...... i'm so excited, it has been sitting there looking at me laughing for 3 months now, and finally i can get some revenge by putting it to work!! |
|
| Author: | EBarajas [ Sun Feb 26, 2006 5:18 am ] |
| Post subject: | |
What type of CNC Machine is it? |
|
| Author: | Don Williams [ Sun Feb 26, 2006 5:24 am ] |
| Post subject: | |
All that new wood and a cnc too....you're scaring me Paddy... |
|
| Author: | PaddyD [ Sun Feb 26, 2006 11:27 am ] |
| Post subject: | |
link to pacer router its an english made machine..... i looked at all sorts of different companies, and in the end it came down to the company which could give me the best tech. support, these guys will be at my house within 24hrs, it also has a phone line connected so they can diagnose from their office can cut stainless steel, aluminium, i am really excited |
|
| Author: | LanceK [ Mon Feb 27, 2006 12:41 am ] |
| Post subject: | |
Enjoy paddy! and snap some in action pics for us eh!
|
|
| Author: | PaddyD [ Mon Feb 27, 2006 5:05 am ] |
| Post subject: | |
well, i saw it move for the first time today..... just glad to know it actually works, considering the amount of time and money involved in getting it!! more training tomorrow, going to design some rails for radius dish making, and some other jigs, just simple 2d stuff for now, and soon 3d carve top everything!!! 
|
|
| Author: | Iplaytheoldies [ Mon Feb 27, 2006 4:19 pm ] |
| Post subject: | |
That's a nice piece of equipment. Will you be offering any radius dishes, templates, or jigs made from your new investment on your web site? |
|
| Author: | PaddyD [ Mon Feb 27, 2006 7:49 pm ] |
| Post subject: | |
that is the idea, inlay jigs dishes, whatever else i can put it to work on!! |
|
| Author: | Serge Poirier [ Wed Mar 01, 2006 9:50 am ] |
| Post subject: | |
Big toys for big boys, man if i had that machine here, my big kid smile would never part from me! 
Serge |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|